1 просмотров
Рейтинг статьи
1 звезда2 звезды3 звезды4 звезды5 звезд
Загрузка...

Бабушкин квадрат: шапка, шарф-мёбиус и митенки крючком на основе популярного мотива от Garnstudio

Бабушкин квадрат: шапка, шарф-мёбиус и митенки крючком на основе популярного мотива от Garnstudio

25 Февраль 2016 by Татьяна

Размеры: митенки — 7/8, шапочка -52-54 см (обхват головы), шарф-петля — 30 см (высота) х 100 см (обхват)

Вам потребуется: пряжа (54% шерсти альпака, 24% полиамида, 22% шерсти; 199 м/25 г) — по 75 г ярко-розовой для митенок и шапочки, 125 г ярко-розовой для шарфа-петли; крючок № 4,5.

Узор «Шишечки» круговыми рядами: число петель кратно 3. Вязать согл. схеме. Начать с петель перед раппортом, раппорт постоянно повторять, закончить петлями после раппорта. 1-4-й р. выполнить 1 раз.

Скрещенные ст. с/н: вязать, как узор «Шишечки», но 5—7-й р. выполнить 1 раз, затем постоянно повторять 6-й и 7-й р. Средняя плотность вязания: 17 п. х 10 р. = 10×10 см.

Pattern instructions

NOTE: This pattern is written in British English. All measurements in charts are in cm. For conversion from cm to inches — click here. There are different terms for crocheting in British and American English. If this pattern includes crochet, click for «crochet terms» here. For this pattern in American English, please click here.

NECK WARMER:
ROUNDS WITH TR:
Beg every round with tr with 3 ch (= 1st tr), finish round with 1 sl st in 3rd ch from beg of round.

COLOUR CHANGE:
To get a nice colour change work last sl st on round with the new thread. Continue on to next round with the new thread.
———————————————————

SQUARE:
Work 6 ch with Delight on hook size 3.5 mm and form a ring with 1 sl st in 1st ch. Read ROUNDS WITH TR.
ROUND 1: * Work 3 tr in ch-ring, 3 ch *, repeat from *-* a total of 4 times = 12 tr and 4 ch-loops. Sl sts until next ch-loop, cut the thread and switch to another colour of the same ball (= new colour each round) — READ COLOUR CHANGE.
ROUND 2: In every ch-loop work as follows: 3 tr, 3 ch and 3 tr, 1 ch = 24 tr and 8 ch-loops. Sl sts until next ch-loop, cut the thread and switch to another colour of the same ball.
ROUND 3: * In next ch-loop work as follows: 3 tr, 3 ch and 3 tr (= corner), 1 ch, in next ch-loop work 3 tr, 1 ch *, repeat from *-* the entire round = 36 tr and 12 ch-loops. Cut and fasten the thread.
Work a total of 25 squares. Work squares tog into 1 strip as follows: Place 2 and 2 squares on top of each other, insert hook through ch-loop in the corner on both squares, work 1 ch and 1 dc, * 3 ch, 1 dc in next ch-loop on both squares *, repeat from *-*, cut and fasten the thread. Work the ends of the strip tog the same way to form a ring – NOTE: twist the strip 1 time to form a twisted ring, before working the ends tog.

Читать еще:  Рождественский вертеп крючком. Описание

NECK WARMER:
Worked from middle of piece = the twisted ring and out towards the outer edges — i.e. work upwards and downwards at the same time. NOTE! Beg every round with 3 ch (= 1st tr).
Work 1st round along the strip as follows: In each of the 4 ch-loops on every square work 3 tr and 1 ch, finish round with 1 sl st in 3rd ch from beg of round (= 1st tr), sl st until next ch-loop. Continue to work as follows: In every ch-loop work 3 tr, 1 ch, finish round with 1 sl st in 3rd ch from beg of round (= 1st tr), sl st until next ch-loop. Continue like this until neck warmer measures approx. 36 cm vertically (the entire piece, not just from the middle and outwards). Cut and fasten the thread.

HAT:
ROUNDS WITH TR:
Beg every round with tr with 3 ch (= 1st tr), finish round with 1 sl st in 3rd ch from beg of round.

DECREASE TIP 1:
Dec 1 tr by working the next 2 tr tog as follows: Work 1 tr but wait with last pull through (= 2 sts on hook), work next tr but on last pull through, pull thread through all 3 sts on hook.

ROUNDS WITH DC:
Beg every round with dc with 1 ch (not counted as 1st dc) — NOTE! Work dc in back loop of every dc, finish with 1 sl st in 1st dc.

DECREASE TIP 2:
Dec 1 dc by working 2 dc tog as follows: * Insert hook in back loop of next dc, get thread *, repeat from *-* one more time, make 1 YO and pull thread through all 3 sts on hook.

Читать еще:  Подставка для смартфона из пластиковой карточки своими руками

COLOUR CHANGE:
To get a nice colour change work last sl st on round with the new thread. Continue on to next round with the new thread.
———————————————————

SQUARE:
Work 6 ch with Delight on hook size 3.5 mm and form a ring with 1 sl st in 1st ch. Read ROUNDS WITH TR.
ROUND 1: * Work 3 tr in ch-ring, 3 ch *, repeat from *-* a total of 4 times = 12 tr and 4 ch-loops. Sl sts until next ch-loop, cut the thread and switch to another colour of the same ball (= new colour each round) — READ COLOUR CHANGE.
ROUND 2: In every ch-loop work as follows: 3 tr, 3 ch and 3 tr, 1 ch = 24 tr and 8 ch-loops. Sl sts until next ch-loop, cut the thread and switch to another colour of the same ball.
ROUND 3: * In next ch-loop work as follows: 3 tr, 3 ch and 3 tr (= corner), 1 ch, in next ch-loop work 3 tr, 1 ch *, repeat from *-* the entire round = 36 tr and 12 ch-loops. Cut and fasten the thread.
Work a total of 8-9 squares. Work squares tog into 1 strip as follows: Place 2 and 2 squares on top of each other, insert hook through ch-loop in the corner on both squares, work 1 ch and 1 dc, * 3 ch, 1 dc in next ch-loop on both squares *, repeat from *-*, cut and fasten the thread. Work the ends of the strip tog the same way to form a ring.

HAT:
Worked in the round. Work along one side of strip as follows: In each of the 4 ch-loops on every square work 3 tr, finish with 1 sl st in 3rd ch (= 1st tr) from beg of round = 96-108 tr. Then work ROUNDS WITH TR — read explanation above — as follows: 3 ch (= 1st tr), skip 1st tr from previous round, 1 tr in every tr, finish round with 1 sl st in 3rd ch from beg of round. Continue until hat measures approx. 16 cm from bottom edge. Then dec as follows:
ROUND 1: * 1 tr in each of the next 6-7 tr, dec 1 tr — READ DECREASE TIP 1 *, repeat from *-* the entire round = 84-96 tr (= 12 sts dec).
ROUND 2: * 1 tr in each of the next 5-6 tr, dec 1 tr *, repeat from *-* the entire round = 72-84 tr.
ROUND 3: * 1 tr in each of the next 4-5 tr, dec 1 tr *, repeat from *-* the entire round = 60-72 tr.
ROUND 4: * 1 tr in each of the next 3-4 tr, dec 1 tr *, repeat from *-* the entire round = 48-60 tr.
ROUND 5: * 1 tr in each of the next 2-3 tr, dec 1 tr *, repeat from *-* the entire round = 36-48 tr.
ROUND 6: * 1 tr in each of the next 1-2 tr, dec 1 tr *, repeat from *-* the entire round = 24-36 tr.
SIZE S/M: Work all tr on round tog 2 by 2 = 12 tr, cut the thread and sew the last tr tog with thread end.
SIZE L/XL:
ROUND 7: * 1 tr in next tr, dec 1 tr *, repeat from *-* the entire round = 24 tr.
ROUND 8: Work all tr on round tog 2 by 2 = 12 tr, cut the thread and sew the last tr tog with thread end.

Читать еще:  Вяжем крючком шляпу из рафии

EDGE:
Work an edge along bottom edge of hat (along the other side of strip with squares) as follows: Work 1 ch, in each of the 4 ch-loops on every square work 4 dc = 128-144 dc, finish with 1 sl st in 1st dc from beg of round. Then work ROUNDS WITH DC — read explanation above. When edge measures approx. 1 cm, dec 16-20 dc evenly on round — READ DECREASE TIP 2 = 112-124 dc. Continue until edge measures approx. 2 cm, cut and fasten the thread. The hat measures approx. 24-25 cm vertically.

Ссылка на основную публикацию
Статьи c упоминанием слов:
Adblock
detector